July 9th, 2010
FluoroVei LLC will be attending the upcoming AACC show, located this year in Anaheim California. Team members are available for meetings on Wednesday July 28th and Thursday July 29th. Please contact us if you would like to schedule a meeting.
Following the AACC, the FluoroVei team will be available at booth #626 at the IAFP show, also at the Anaheim Convention Center. FluoroVei’s line of rapid diagnostic tests important to the food industry, such as its cutting edge Salmonella test which provides results in as little as 4 hours versus the typical 48 – 72 hours, will be featured. Please stop by to see us at the IAFP, August 1st – 3rd, along with our sister company, Vista Enterprises Incorporated (VEI).
Posted in News and Updates | Comments Off
July 2nd, 2010
In the race to detect Salmonella quickly, FluoroVei’s test for Salmonella comes to the finish line in first place. Salmonella is a major food contamination problem triggering massive food recalls. Time is critical to the food industry, and when other methods to test for Salmonella are used, the results are not available for days. Too late! FluoroVei’s test for Salmonella provides results in 4 to 6 hours. Less than one work shift! A validation testing report is available. Contact FluoroVei to request a copy.
Posted in News and Updates | Comments Off
April 7th, 2010
Once again, the FluoroQuik system has proven itself, this time bringing its accomplishments to the attention of the medical world. Using urine samples with 15 different Serovar strains of Chlamydia trachomatis, each Serovar was detected as early as 2 minutes from the time the urine sample and FluoroQuik reagent were mixed and placed into the FluoroQuik fluorometer. Readings were taken at 2 minutes, 5 minutes, and 10 minutes resulting with increased readings in picomoles of fluorescence as the reactions between the Chlamydia and FluoroQuik reagent occurred. Using urine samples will allow for the FluoroQuik system to be utilized for both female and male patients. The fast diagnosis will allow for immediate POC (Point of Care) treatment of patients, thus helping to prevent the spread of illness. Please contact FluoroVei for a copy of the report.
Posted in News and Updates | Comments Off
March 25th, 2010
It has been found that in real world situations, bacteria will not always be healthy and producing enzymes, especially when they are in a stressed state (dormant). This is primarily important in the water testing market where water is treated, thereby stressing the bacteria, but possibly not killing all of the bacteria present.
FluoroQuik testing conducted with < 5 stressed cells per 100 ml of water, utilized a short incubation phase, and was able to detect the presence of stressed bacteria between 1 and 4 hours. These results are fantastic and will enable critical water testing to be completed in just a few hours versus the usual 24+ hours currently performed.
Posted in News and Updates | Comments Off
January 2nd, 2010
FluoroVei had a successful end to 2009 after meetings with several substantial industry leaders interested in the FluoroQuik diagnostic system. The FluoroQuik system was put through its paces at many of the companies with on-site testing.
FluoroVei looks forward to further discussions in 2010 and aligning itself with the best fit possible for water safety testing, food safety, sanitation, and medical diagnostics.
Posted in News and Updates | Comments Off
September 18th, 2009
FluoroVei is proud to be appearing at MEDICA with its sister company, BioVei Incorporated. MEDICA is the world forum for medicine, and is locted in Dusseldorf Germany. We will be featured at BioVei’s booth, which is located in Hall 3 in the U.S. Pavilion. The booth number is 3/D-29-16. FluoroVei is excited to have this opportunity to present its new FluoroQuik diagnostic system at this world event. Please feel free to contact us prior to the event with any questions, or if you would like to schedule a specific meeting appointment time.
Posted in News and Updates | Comments Off
July 5th, 2009
FluoroVei has broken the industry’s barrier of 48 to 72 hours to detect 1 CFU of Salmonella. The FluoroQuik system is able to detect 1 CFU of Salmonella in as little as 4 hours from time of sample collection – Less Than One Shift! FluoroQuik is being touted as the “Holy Grail”.
Posted in News and Updates | Comments Off
July 5th, 2009
FluoroVei will present it’s FluoroQuik system at the upcoming PMA (Produce Marketing Association) show in Monterey, California on Sunday July 26th. FluoroQuik will be featured at the Vista Enterprises Incorporated’s booth number 253.
Posted in News and Updates | Comments Off
July 5th, 2009
FluoroVei will be attending the AACC in Chicago July 21st and 22nd. Meetings will be held with various companies interested in the new FluoroQuik system for both medical and non-medical uses.
Posted in Uncategorized | Comments Off
May 21st, 2009
The FluoroQuik system will be available for review at the International Association for Food Protection(IAFP) event in Grapevine Texas, July 12th - 14th. Please visit see us at the Vista Enterprises Incorporated’s booth, number 409. FluoroVei is pleased to have this opportunity to meet with leaders in the food safety industry.
Posted in News and Updates | Comments Off